✦Telescopes

How to Choose a Solar Filter for Observing the Sun

A full-aperture solar filter must cover the entire objective. Check its fit and film condition before observing: cameras and binoculars are dangerous without fi

Illustration for the article “How to Choose a Solar Filter for Observing the Sun”

For solar observing, choose a filter designed specifically for viewing the Sun and compatible with your optical tube. It must cover the telescope’s aperture at the objective end and be securely attached.

A filter in front of the objective reduces sunlight to a level safe for observing. Eyepiece filters are not suitable for this purpose: do not use them, even if they are sold as solar filters.

When choosing a filter, check that it is compatible with the tube’s diameter, that the material is intact, and that the filter is securely mounted. Before every observing session, make sure it is undamaged and cannot slip off.

Ways to observe the Sun and the precautions required
Method or instrument What is required Main limitation
Telescope, direct viewing Special solar filter in front of the objective The filter must cover the entire aperture and be securely attached
Binoculars Special solar protection Observing the Sun without it is dangerous
Camera Special solar filter for the device The camera itself does not protect your eyesight
Projection onto a screen View the image, not directly through the optics Unfiltered optics may heat up
  • 1 024 registered reports the number of reports in the summary, which also lists cases of retinal injury
  • 147 patients patients with retinal injury in the summary of reports
  • 0,01 % share of people who sought care with registered cases in one Indian hospital network

Which filter should you choose for a telescope?

Choose a special solar filter designed for observing through optics, not an ordinary planetary filter. Observing the Sun through a telescope without a solar filter is dangerous: the optics can also heat up.

Full-aperture fit

A full-aperture filter covers the telescope’s entire objective. Its astronomical film reduces overall brightness and blocks most solar radiation. For example, the Sky-Watcher filter for the MAK 127 mm uses this design; check that it is compatible with your instrument model before buying.

  • Purpose: a special solar filter for observing through a telescope, not a planetary filter.
  • Design: a full-aperture filter must cover the entire objective.
  • Compatibility: the Sky-Watcher filter for the MAK 127 mm is one example, but you need to choose a filter for your own telescope model.

The summary of 1 024 registered reports lists 147 patients with retinal injury; among the 17 patients with severe cases, visual acuity was below 2/10, and another 7 had bilateral injury.

How do you check a filter before installing it?

Check the solar filter before installing it: inspect the film against the light, choose a holder that fits the objective, and make sure it is firmly secured.

  • Inspect the special astronomical film against the light. Do not use the filter if you see any damage or defects.
  • Check that the holder fits the telescope’s objective. A full-aperture filter must cover the entire aperture.
  • Check the attachment: the holder must fit snugly and not slip off as the telescope moves.

Do not point the telescope at the Sun until the filter is installed and checked. This also applies to observing through a camera or binoculars: a special solar filter must be fitted to the instrument.

Why checking matters

Retinal injury from observing the Sun is rare, but its consequences can be serious. Over eleven years, one Indian hospital network recorded 253 cases of retinal injury among more than three million new patients—that is, 0,01 % of those who sought care. The risk should not be judged by how rare these cases are: before observing, the priority is to make sure the filter is intact, covers the objective, and is securely attached.

How do you safely install a filter and start observing?

To observe the Sun safely through a telescope, secure a special solar filter in front of the objective, check the holder, and only then point the instrument at the Sun.

  1. Install the filter at the front of the telescope—in front of the objective, not at the eyepiece. A full-aperture filter covers the entire objective.

  2. Before pointing at the Sun, check that the holder is secure. Check it again if you change the telescope’s position: the filter must remain firmly attached.

  3. Once the filter is installed and secure, point the telescope at the Sun and observe through the eyepiece.

Do not remove the filter while the telescope is pointed at the Sun. Observing through a telescope without a special solar filter is dangerous: concentrated sunlight can damage your eyesight, and the instrument’s optics will be unprotected from heat.

Which accessories must not be used without a solar filter?

Do not look at the Sun through a telescope, binoculars, or a camera without a special solar filter: the instrument itself does not protect your eyes.

  • Telescope. Fit a filter designed for solar observing in front of the objective. Do not replace it with a screen: unfiltered optics can heat up and remain unprotected.
  • Binoculars and cameras. They also need special solar protection; using them without a filter is dangerous.
  • Regular glasses and planetary filters. They are not substitutes for a solar filter. A planetary filter reduces the brightness of light from a planet, but is not designed for safe solar observing.

A full-aperture filter is suitable for a telescope: it covers the entire objective and blocks most solar radiation. Before observing, check that the filter is fitted to the instrument and is not being used separately as a screen.

When is a filter not needed for observing, and why is that different?

With solar projection, you do not look directly through unprotected optics: the image is formed on a screen. But the telescope is still pointed at the Sun, so its optics can heat up without a filter.

What changes with projection

In an article on ochkov.net, Bishop advises those choosing to observe without a filter to turn their backs to the Sun and view its projection. This does not make the telescope a protected instrument: sunlight still passes through the optics and reaches the screen.

  • Projection: the Sun is viewed on a screen, not directly through the telescope; the optics remain pointed at the Sun and may heat up.
  • Direct viewing: the Sun is viewed through a telescope with an aperture solar filter fitted to the objective.

Projection and observing through an aperture filter are different methods. Do not apply the rules for one method to the other: if you choose direct viewing, use a special solar filter.

Why must you never look at the Sun without protection, even briefly?

Never look at the Sun without suitable protection, even briefly: unfiltered radiation viewed through a telescope, binoculars, or a camera can damage the retina.

The summary of 1 024 registered reports lists 147 patients with retinal injury. Among patients with severe cases, visual acuity was below 2/10 in 17, and 7 had bilateral injury.

Over eleven years, one Indian hospital network recorded 253 cases of retinal injury among more than three million new patients—0,01 % of those who sought care. These figures describe specific observations, not the likelihood of injury for an individual observer.

A telescope requires a special solar filter fitted in front of the objective; a screen or a filter for ordinary observing is not a substitute. Before pointing at the Sun, check that the filter fits the instrument and covers the objective.

Frequently asked questions

Where should a solar filter go on a telescope?
At the front of the telescope, in front of the objective. A full-aperture filter must cover the entire objective.
Will an ordinary planetary filter work?
No. You need a special solar filter designed for observing the Sun through optics.
Can you look at the Sun through binoculars or a camera?
Only with special solar protection for the instrument. Observing without it is dangerous.
Can a screen be used instead of a filter?
Projection onto a screen is a separate observing method, but optics without a filter can heat up. Do not consider the screen protection for the telescope.

Sources

  • 4glaza.ru — “Buy a solar or lunar filter for a telescope at”
  • astronomy.ru — “Vision loss from observing the Sun: myth or reality?”
  • rus.delfi.lv — “How to protect your eyes while observing a solar eclipse”
  • ru.euronews.com — “How to protect your eyes while observing a solar eclipse”
  • ozon.uz — “Sky-Watcher solar filter for MAK 127 mm for”

Related